Motorcycle front wheel axle

Gracjan

Reliable opinion

For junachuk 906 fits perfectly, goes in like butter. I really recommend the axle is perfectly matched and at a very good price. I recommend buying it because it is fast delivery, and comes peacefully packed that it will not be damaged during transport. Best regards and happy shopping. I recommend this axle

Mirosław

Reliable opinion

The product is 100% fit and solid. The lack of a new nut can be counted as a downside- plural, because the downside is the label- mz with drum brake, and disc brake has different length of the under-rolling (thicker part entering the left lag). The disc-brake has a 66mm under-rotation, while the drum-brake has a 90mm under-rotation.

Tomasz

Reliable opinion

WSK M06 B3 front wheel - the axle has a larger diameter than the original. It would only be pressed into new bearings with a press. You need to run it down with a file (or lathe) all the way to make it OK. It could be 3-4 mm longer, so that the nut fully enters the thread.

Tomasz

Reliable opinion

Galvanized parts, of good quality material, fit Romet Pony M2, I recommend in the absence of original parts. If someone put larger bearings and axle for the front wheel, these cones will also fit the front.

Jan

Reliable opinion

The wheel axle fits without problems. The zinc plating protects it from rusting. The nut included is with self-locking plastic, so it is better to change the nut to a regular one to better reflect the atmosphere of a bygone era.

Krystian

Reliable opinion

I own a Komar 2350 from 74r with s38 2 gear engine . Axle fits perfectly but it is a pity ze bearings for it are in a separate auction you have to search a little. The solution is better than the old garlands. I recommend.

Sebastian

Reliable opinion

The axle is made of very good material, it looks solid. The thickness is appropriate, it fits very snugly into the wheel, so there is no play. Unfortunately for my wsk kos this axle is a bit short!

Paweł

Reliable opinion

Worthless product. The place of bearing seating- the middle part of the axle has a smaller diameter( 9mm) than the thread ( 10mm). The bearing after installation has a play on the axle of 1 mm.I advise against the purchase of this product

Jakub

Reliable opinion

After gently wiping it with sandpaper it fits perfectly in the bearing ironically I mounted it on the rear because the dimensions matched perfectly. Wsk 125 79r I do not know what model

Damian

Reliable opinion

Romet Komar 2350 1976 year, Os does not fit. Too short threading or totally for another model of Romet. The original Axle has M12 thread on the Conus and the rest of the thread is M10.

Tomasz

Reliable opinion

Well the axle strong, solid. Previously I bought some chrome plated crap, made of plasticine - a massacre. This one looks slightly scary, but at least it is of the right quality

Sebastian

Reliable opinion

Ogar 200 Product as described fast delivery and good contact with the seller store worth recommending. And really careful protection of purchased items .

Piotr

Reliable opinion

fits

Marcin

Reliable opinion

The bushing for Simson S51 is in great condition fits perfectly, product as described, very good workmanship. I will be ordering more parts from this company. I recommend.

Seweryn

Reliable opinion

Axles good nicely made only had to heat the axles to make the stickers come off, and yes they fit nicely. I had to use other bushings because they did not fit me.

Mateusz

Reliable opinion

Very good aesthetics and quality workmanship, for my Simsonk Sr50 axle fit 100%. I recommend it as much as possible. Shopping at g-moto is sheer pleasure.

Robert

Reliable opinion

Romet ogar 205 changing bearings to ball bearings is only the axle from gmoto.pl Material good quality thread ok. I have seen the quality of others and recommend only from gmoto.pl

Miloslav

Reliable opinion

Speed of delivery, great selection of items, great quality workmanship, thread works beautifully not like other companies. Everything fits as it should

Jakub

Reliable opinion

Jawa 50 Mustang Sport - axle for the front wheel, galvanized, installation passed ok, everything fits. The nut is missing the spring washer.

Paweł

Reliable opinion

Buying a product is required to fit and look as such. After unpacking, corrosion efflorescence on the galvanized part, poor coating.