Motorcycle headlight unit - front

Sylwester

Reliable opinion

The front lamp insert from Wesem, it looks very nice, there is nothing to complain about as far as the insert is concerned, while as for the tail lamp, it is aesthetically made, but there is no possibility of connecting a stop light, and it is a pity that there is no reflector as in the original, only a piece of sheet metal. Awiny bulbs without approval.

Krzysztof

Reliable opinion

WSK 1969 year b1, so called two frame. The glass fits super well. I had concerns about whether it would sometimes sweep too much space in my lamp (I've had that happen before) but it's all as it should be. It works nicely, gives good light, bulb mounting also without problems. The look is also reminiscent of products from that era. I recommend and greetings

Jarosław

Reliable opinion

hello front lamp insert as well as the frame fit very well but the rear lamp is some kind of Chinese thing the spacing of the screws does not match and in general far from the original on the photo no1 original on the right rear lamp from g-moto.ps please take care of the details and relying on the originals we are restoring old motorcycles not Chinese vacuu... more

Jarosław

Reliable opinion

WSK 125 M06 B3, 1984. The front lamp insert of very good quality, perfectly matched. As for the tail lamp, its workmanship is also very good. The only thing to complain about is the lack of possibility to connect the stop.

PAWEŁ

Reliable opinion

Simson S51 H4 headlight for Jawa 350 plastic housing installed in S51 fits perfectly no problems changing from regular to h4 cartridge replacement time about 5 minutes.

Kaare

Reliable opinion

The headlight insert was a perfect fit for my original headlight on a Moto Guzzi V50III. The diffuser was attached to the headlight bezel with 4 locking springs.

Michał

Reliable opinion

Etz 125- very well made, very good quality, super sie presents I am very satisfied with this product.

Leszek

Reliable opinion

Jawa 350, type 634-7, year 1982 The frame in a separate package than the optical element. Dimensions match each other, but in the optical element the way of positioning is different than in the frame (the frame the same as the original, and the optical element different than the original, on the box there is a description skoda 105). Because of this, there i... more

Krzysztof

Reliable opinion

I own a Romet Kadet and decided to restore it, the problem turned out to be the lamp which did not survive the test of time fortunately at Gmoto I found what I was looking for although I was not sure if parts for such old mopeds are available, installation was easy put the bulb in, connect three wires and you can ride, the quality of the lamp is very good an... more

Michał

Reliable opinion

The motorcycle is a MZ ETZ 150 89r. The optical element of good quality. Only a little rework is needed to power the position bulb, because the original bulb mount to which the ground is connected does not fit the element. Due to the fact that the position bulb needs a separate ground cable, you simply have to make one and crimp a flat connector on the origi... more

Andrzej

Reliable opinion

Junak M16 - the cartridge fits almost perfectly; the quality is incomparably better than the original from Rice (all Chinese plastic, frosted-milk glass - causing blinding light scattering of the bulb). Aside from the mismatched spring attaching the bulb holder, the effect of replacing the headlight insert is worth any money. Recommended.

Miklós

Reliable opinion

A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*

Arkadiusz

Reliable opinion

The front lamp insert matches the old original lamp although this can no longer be said of the bulb, but after a little modification it shines very well. Tail lamp nothing to add nothing to add. The frame of the headlamp nicely you chrome and add flash to the lamp.

Idzi

Reliable opinion

I own a Mz Etz 250 year of production1987. I replaced the optical element (mirror with headlight glass) due to a hole in the glass and a frosted mirror. Replacement was hassle-free, all parts matched. Now the headlight in my motorcycle like new.

Piotr

Reliable opinion

Wsk 125 1976.Everything in the best possible order although there are minor differences in comparison with the old lampshade and bulb mounting, but everything can be matched. You just need to remember to buy a new headlight bulb, because it is a different mount.

Jan

Reliable opinion

It fits perfectly in the original frame. The glass layout is at first glance the same as the original. The mirror is super chrome plated. A big plus is the parking light bulb mount included, it saves us money. I confidently recommend.

Mariusz

Reliable opinion

Product of very good quality and super price. It has an approval. I applied to Harley-Davidson FLH 1200 1977. Fits perfectly, only need to cut in the housing inside the lamp for the parking bulb. Shape visually like the original.

Adam

Reliable opinion

Elements made carefully glass also very nice after putting it on the light shines much better than on the original faded reflector I recommend to everyone because in a motorcycle lighting besides brakes is the most important thing

Marek

Reliable opinion

It looks cool but required fitting to the old motorcycle lamp housing. A little cutting and sanding and it managed to fit. Perhaps my housing originally had a metal clamp. No less a product I recommend.

Konrad

Reliable opinion

Motorcycle WSK 175. as in the picture parts solid easy to install. Chrome super. All dimensions maintained. A set of light bulbs. In addition, the set of screws for installation for which great thanks. I sincerely recommend